Anti-scaling/anti-fouling chemicals provided by TVTS have the trade name “Roprep” of ROCHEM. They are used to prevent scaling for RO/NF/UF/MF membranes during water filtration operations.

1. Features:

Roprep anti-scaling chemicals have the ability to dissolve substances that cause scaling on the membrane. Especially silica, Ca2+ salt, preventing inorganic ions from sticking to the membrane. Helps improve treatment efficiency, reduce the need for membrane cleaning and increase membrane life.

2. Specifications

• Trade Name: ROPREP
• Manufacturer: ROMACO – German Brand
• Origin: Netherlands
• Specification: 30 kg/can
• Ingredients: Maleic Acid Copolymer; Phosphinocarboxylic Acid; 1-Hydroxyethylidene-1; 1-Diphosponicacid
• Physical properties: Liquid, colorless, with characteristic odor
• Vapor pressure at 20o C: 20 hPa
• Density at 20o C: 1.16 – 1.18 g / cm³
• Solubility: Completely soluble in water at room temperature
• pH at 20o C: 3.8 – 4.2
• Flash point: None
• Freezing temperature: -40o C
• Initial boiling point: 100o C

3. Instructions for use

Mix chemicals directly with wastewater into the RO/NF/UF/MF system.

The chemical run rate according to hardness content can be referred to as follows:

• Water treatment system: ~ 3 – 5 ppm
• Wastewater treatment system: > 10 ppm

Depending on the concentration of film-forming substances in wastewater, adjust the Roprep chemical ratio accordingly.

4. First aid for chemical exposure

Some situations that may arise, please note:

• In case of inhalation: keep the patient in a side-lying position and move to the nearest medical facility.In case of contact with
• hands/skin: wash thoroughly with water and soap.
• In case of contact with eyes: open eyes and rinse under running water for several minutes. If symptoms do not improve, move to the nearest medical facility.
• In case of ingestion: drink plenty of water to dilute the concentration and eliminate it.

See more

Membrane cleaner AA

Membrane cleaner B

Membrane cleaner C